Makita 18v Drill & Impact Driver Twin Pack DLX2580TJ
The Makita 18V Drill & Impact Driver Twin Pack DLX2580TJ is a cordless LXT combo kit built for professional tradespeople and serious DIY users who need everyday drilling and fastening covered in one case. It pairs the compact brushless DHP490 combi drill with the brushless DTD158 impact driver, so you can switch between controlled screwdriving, drilling in wood, metal and light masonry, and high-torque impact fastening without carrying two separate kits.
Both tools run on Makita’s 18V LXT platform. The pack is supplied ready for site use with two 5.0Ah BL1850B batteries, a DC18RC fast charger and a Makpac Type 3 connector case (821551-8) for storage and transport. Extend your Makita guarantee by registering online after purchase.
Kit Includes
- DHP490 18V LXT Brushless Combi Drill
- DTD158 18V LXT Brushless Impact Driver
- Makpac Case Type 3 (821551-8)
- 2 x 5.0Ah LXT Batteries (BL1850B)
- DC18RC Fast Charger
- Part Number: DLX2580TJ
Makita 18v Combi Drill DHP490
The DHP490 is a lightweight, compact 18V LXT brushless combi drill designed for general screwdriving and drilling, including impact drilling in brick and masonry. Overall length is just 172 mm, so it is easy to handle in tight spaces, while the brushless motor delivers a maximum torque of 65 Nm. A mechanical 2-speed gearbox covers high-speed light drilling and low-speed high-torque work, with 20 clutch settings for controlled fastening and a keyless 1.5–13 mm chuck for quick bit changes.
Variable speed by trigger, an electric brake, forward/reverse, and a built-in LED with pre-glow and afterglow support accurate work. eXtreme Protection Technology (XPT) improves dust and water resistance for harsher site conditions, and the battery protection circuit helps guard against overloading, over-discharging and overheating.
Features
- Makita 18v Twin Pack Drill and Impact Driver DLX2580TJ
- Brushless motor – up to 65 Nm max torque in a compact body
- Mechanical 2-speed gearing – high speed for light drilling; low speed for high-torque applications
- 20 torque / clutch settings plus drill and hammer-drill modes
- Keyless chuck 1.5–13 mm – easy one-handed bit changes
- Built-in LED job light with pre-glow and afterglow
- Variable speed trigger – match speed to the material
- Electric brake and reversing switch
- eXtreme Protection Technology (XPT) – improved dust and water resistance
- Battery protection circuit – against overloading, over-discharging and overheating
- Drilling capacities – wood 38 mm, steel 13 mm, masonry 13 mm
Specifications
| Voltage: | 18v |
| Motor: | Brushless |
| No Load Speed: | 0 - 500 / 1900 min⁻¹ |
| Max. Fastening Torque Hard/Soft: | 50 / 27 Nm |
| Max Torque: | 65 Nm |
| Torque Setting: | 20 |
| Impacts per Minute (IPM): | 0 - 7500 / 28500 min⁻¹ |
| Max. Drilling Diameter in Masonry: | 13mm |
| Max. Drilling Diameter in Steel: | 13mm |
| Max. Drilling Diameter in Wood: | 38mm |
| Drilling Capacity Wood (Auger Bit): | 38mm |
| Drilling Capacity Wood (Self-feed bit): | 38mm |
| Drilling Capacity Flat Bit: | 40mm |
| Drilling Capacity Hole Saw: | 51mm |
| Driving Shank: | 1/2"-20UNF |
| Drill Chuck Capacity: | 1,5 - 13 mm |
| Electronic Brake: | Yes |
| Vibration Level, Drilling into Metal: | ≤ 2,5 m/s² |
| Vibration Uncertainty (K Factor), Drilling into metal: | 1,5 m/s² |
| Vibration Level, Impact Drilling into Concrete: | 8,1 m/s² |
| Vibration Uncertainty (K Factor), Impact Drilling into Concrete: | 1,5 m/s² |
| Sound Power Level (LWA): | 96 dB(A) |
| Sound Pressure Level (LpA): | 88 dB(A) |
| Noise Uncertainty (K Factor): | 3 dB(A) |
| Product Dimensions (L x W x H): | 172 x 81 x 255 mm |
| Tool weight with Battery: | 1,4 - 1,7 kg |
| Product net Weight: | 1,0 kg |
Makita 18v Impact Driver DTD158
The DTD158 is a compact, lightweight 18V LXT brushless impact driver for fast, high-torque fastening. It delivers up to 170 Nm max fastening torque, a no-load speed of 0–3400 min⁻¹ and up to 3600 impacts per minute. A one-touch 1/4" hex holder makes bit changes quick and secure, while an optimised battery position helps keep the centre of gravity close to the handle for better balance on longer jobs.
Variable speed by trigger lets you match power to the fastener and material. Capacities cover machine screws M4–M8, standard bolts M5–M16 and high-tensile bolts M5–M14. An LED job light, rubber-coated grip, electric brake and low-battery cut-off support day-to-day site use.
Features
- Brushless motor – efficient fastening with lower power draw
- Max fastening torque 170 Nm
- No-load speed 0–3400 min⁻¹; impacts up to 3600 min⁻¹
- One-touch 1/4" hex bit holder – quick, secure bit changes
- Variable speed control by trigger
- LED light illuminates the work area
- Rubber-coated handle for a firm grip
- Electric brake for control and productivity
- Battery protection system – shuts off when battery level is low
- Capacities – machine screw M4–M8; standard bolt M5–M16; high-tensile bolt M5–M14
- Kit Supplied with 2 x 5ah batteries and Fast Battey Charger
Specifications
| Voltage: | 18v |
| Motor: | Brushless |
| No Load Speed: | 0 - 3400 min⁻¹ |
| Max Fastening Torque: | 170 Nm |
| Impacts per Minute (IPM): | 0 - 3600 min⁻¹ |
| Tightening Capacity Standard Bolt: | M5 - M16 |
| Capacity Machine Screw: | M4 - M8 |
| Tightening Capacity High Tensile Bolt: | M5 - M14 |
| Driving Shank: | 1/4" |
| Sound Power Level (LWA): | 105 dB(A) |
| Sound Pressure Level (LpA): | 97 dB(A) |
| Noise Uncertainty (K Factor): | 3 dB(A) |
| Vibration Level, Impact Tightening of Fasteners of the Maximum Capacity of the Tool: | 10,9 m/s² |
| Vibration Uncertainty (K Factor), Impact Tightening of Fasteners of the Maximum Capacity of the Tool: | 2,0 m/s² |
| Product Dimensions (L x W x H): | 125 x 81 x 251 mm |
| Tool Weight with Battery: | 1,3 - 1,6 kg |
| Product Net Weight: | 0,90 kg |
Check out our wide range of Makita Twin Pack Kits & more high-quality Kits and Twin Pack brands.
Toolforce
Here at Toolforce, we take great pride in the products and the ranges we offer to our customers. Order today for Fast Dispatch and Delivery. We deliver to you using our Shipping Partners DPD. Don't forget we offer Free Delivery on all orders over €100. To benefit from this you can continue to browse through thousands of high quality tools online. Hand Tools, Power Tools, Tool Storage Systems, Safety Workwear and PPE, Diagnostic Systems from the Leading Brands Milwaukee, DeWalt, Makita, Einhell, Sealey, Draper, Sip, Swp, Silverline, Autel, Vikan and Many More. When you Shop with Toolforce you are in safe hands. If you need any further assistance or have any questions on any of our products Ranges, please don't hesitate to Contact us email - info@toolforce.ie, Makita 18v Drill & Impact Driver Twin Pack DLX2580TJ
