PCL 24L 2HP Direct Drive Air Compressor & 9 Piece Accessory Kit
The PCL 24L 2HP Direct Drive Air Compressor Kit is a workshop air starter kit for garage, trade and DIY use. It brings together a 24 litre oil-lubricated direct drive compressor with the airline fittings and tools for everyday compressed-air jobs: inflating tyres, blowing down work and components, light spraying, and running air accessories.
At the heart of the kit is the CM2024D 24 litre, 2 HP compressor, with a maximum working pressure of 8 bar / 116 psi. Air is taken from its twin outlets, which are fitted with genuine PCL Airflow couplings, through the 7.5 m black PU coiled hose (HA5215). The Vertex double-action coupling (AC91CF) and the two UK standard adaptors (ACA2593 male R 1/4 and ACA2746 female Rp 1/4) are included so you can connect the hose and tools on a typical UK-profile airline.
The kit also includes an airlite eco linear tyre inflator for checking and inflating tyres, an alloy pistol-grip blowgun for blowing down, and a Lite suction spray gun for light-viscosity painting. PCL describes the compressor as a robust solution for trade and DIY workshop applications, including spray guns, air tools, inflating, cleaning and blowing, as well as stapling and nailing, and as suitable for occasional spraying. With the 24 litre compressor in this kit, treat spray work as lighter, occasional use.
Features
- 1 × PCL CM2024D – 24L 2HP Direct Drive Compressor, 8 bar / 116 psi, air displacement 206 l/min / 7.3 cfm
- 1 × PCL HA5215 – Polyurethane Coiled Hose Assembly, black, 7.5 m of 6.5 mm i/d hose, male thread R 1/4 swivel ends
- 1 × PCL AC91CF – Vertex Coupling, female thread Rp 1/4, double action for trailing hose applications
- 1 × PCL ACA2593 – Standard Adaptor, male thread R 1/4
- 1 × PCL ACA2746 – Standard Adaptor, female thread Rp 1/4
- 1 × PCL SG01L – Lite Suction Spray Gun, 1.5 mm nozzle, 0.75 L bowl
- 1 × PCL BG405 – Alloy Blowgun with conical and safety nozzles, pistol grip
- 1 × PCL LAG1H03 – airlite eco Tyre Inflator, 0.4 m hose, twin hold-on connector, 0–140 psi / 0–9.6 bar
- Eight-piece workshop air kit – one of each genuine PCL product listed above
- 24 litre 2 HP oil-lubricated direct drive compressor – 8 bar / 116 psi maximum working pressure, 230 V / 50 Hz single phase
- Air displacement – 206 l/min / 7.3 cfm (PCL official specification; this is displacement, not free air delivery)
- Twin outlets with genuine PCL Airflow couplings – for connection to UK standard airline fittings
- 7.5 m black PU coiled hose – 6.5 mm i/d, male R 1/4 360° swivel ends and spring guards
- Vertex double-action coupling and UK standard adaptors – female Rp 1/4 coupling plus male R 1/4 and female Rp 1/4 adaptors
- Lite suction spray gun – 1.5 mm nozzle, 0.75 L bowl, supplied with cleaning brush and hose tailpiece adaptor
- Alloy pistol-grip blowgun – supplied with conical and safety nozzles, Rp 1/4 air inlet
- airlite eco linear tyre inflator – 0.4 m hose, twin hold-on connector, 0–140 psi / 0–9.6 bar, accuracy ±2 psi
- Part Number:
PCL CM2024D – 24L 2HP Direct Drive Compressor
PCL’s direct drive piston compressors are a robust, reliable solution for trade and DIY workshop applications. The CM2024D uses a 2 HP compressor pump, direct driven by an electric motor, with automatic controls for ease of use. It has genuine PCL Airflow couplings on the twin outlets, clear pressure gauges and an oil-level gauge, a simple push on/off button start, durable wheels, and is supplied with a bottle of SAE 30 motor oil and an operating/maintenance manual.
- Air receiver – 24 litre
- Motor – 2 HP / 1.5 kW / 2850 rpm, oil-lubricated direct drive
- Voltage – 230 V / 50 Hz / single phase
- Maximum working pressure – 8 bar / 116 psi
- Air displacement – 206 l/min / 7.3 cfm
- Sound – 82 dBA; dimensions – 59 × 28 × 62 cm
PCL HA5215 – Polyurethane Coiled Hose Assembly
This black PU coiled air hose assembly is made from polyurethane rather than nylon, which increases the working temperature range and reduces kinking, abrasion and oil-related limitations. PU can be used in any direction, helping to keep the work area clearer of trip hazards. The hose recoils to a fraction of its working length and is fitted with nickel-plated 360° swivel ends and spring guards.
- Hose length – 7.5 m; colour – black
- Hose bore – 6.5 mm i/d; outside diameter – 10 mm
- Fittings – male thread R 1/4, nickel-plated 360° swivel ends
- 200 mm straight ends with spring guard
- Maximum working pressure – 14 bar / 200 psi; burst pressure – 42 bar / 600 psi (3:1 safety factor)
- Temperature range – −5°C to 65°C; material – polyurethane (PU)
PCL AC91CF – Vertex Coupling Female Thread Rp 1/4
Designed and manufactured in Sheffield by PCL, this quick-release Vertex coupling has a double-action mechanism for trailing-hose use in garages and tyre shops, where operators are using air tools or hand-held inflators. It has a protective shoulder to help prevent dirt ingress and accidental disconnection, a positive locking mechanism, a British Standard profile, and a blue PCL silicone band for identification.
- Thread – female Rp 1/4; British Standard profile
- Double action – designed for trailing hose applications
- Flow rate – 43 cfm @ 100 psi; maximum working pressure – 14 bar / 200 psi
- Temperature range – −40°C to 100°C; material – steel
- Compatible with Standard Adaptors; interchange – Rectus 19, Kee 057 Series, OETIKER SC Series P, Ludecke ESB
- 5 year warranty (PCL, this coupling only)
PCL ACA2593 – Standard Adaptor Male Thread R 1/4
The original UK-profile Standard Adaptor, manufactured in the UK alongside PCL couplings. Case-hardened steel construction with a corrosion-resistant finish, for use in most workshop and garage environments with Airflow, Vertex, UK Standard Push Button Safety, Safeflow and Non-corrodible couplings.
- Thread – male R 1/4
- Flow rate – 43 cfm @ 100 psi
- Maximum working pressure – 14 bar / 200 psi
- Temperature range – −40°C to 100°C
- Material – case-hardened steel, corrosion-resistant finish
PCL ACA2746 – Standard Adaptor Female Thread Rp 1/4
The female-thread counterpart to the ACA2593, this UK-profile Standard Adaptor is also manufactured in the UK from case-hardened steel with a corrosion-resistant finish. It is used in the same workshop and garage airline applications, with Airflow, Vertex, UK Standard Push Button Safety, Safeflow and Non-corrodible couplings.
- Thread – female Rp 1/4
- Flow rate – 43 cfm @ 100 psi
- Maximum working pressure – 14 bar / 200 psi
- Temperature range – −40°C to 100°C
- Material – case-hardened steel, corrosion-resistant finish
PCL SG01L – Lite Suction Spray Gun
The Lite suction spray gun is part of PCL’s economy range. It is made from lightweight aluminium and is supplied with a 1.5 mm nozzle as standard, together with a cleaning brush and hose tailpiece adaptor. PCL lists it as suitable for light-viscosity painting applications, including solvent-based lacquer, enamel, urethane, epoxy, clear coat, stains and polyurethane. With the 24 litre compressor in this kit, it is best suited to lighter, occasional spraying.
- Type – suction-feed spray gun; material – lightweight aluminium
- Nozzle size – 1.5 mm; bowl capacity – 0.75 L
- Operating pressure – 3 bar / 43 psi
- Air consumption – 4.2–7.1 cfm / 120–201 l/min
- Supplied with – cleaning brush and hose tailpiece adaptor
PCL BG405 – Alloy Blowgun with Conical & Safety Nozzles
This pistol-grip blowgun is manufactured from die-cast alloy for a long, trouble-free life. It has a robust, compact design and is supplied with conical and safety nozzles, display packed for convenience.
- Grip style – pistol; material – die-cast alloy
- Nozzles – conical and safety (both supplied)
- Air inlet – Rp 1/4
- Maximum supply pressure – 10 bar / 140 psi
- Air flow – 11.2 cfm / 320 l/min
PCL LAG1H03 – airlite eco Tyre Inflator
The airlite eco is PCL’s economy linear tyre inflator, made from nylon-filled polymer, which gives a naturally insulated, robust feel. It has a textured thumb lever for control when inflating or deflating, a larger window for clearer readings, and a 0.4 m hose with a twin hold-on connector.
- Display type – linear; hose length – 0.4 m
- Tyre valve connection – twin hold-on
- Calibration / range – 0–140 psi / 0–9.6 bar
- Accuracy – ±2 psi
- Maximum inlet pressure – 188 psi / 13 bar
| Weight (kg) | 24.845000 |
| UOM | Ea |
| Brand | PCL |
| Product Type | Workshop Air Compressor Kit |
| Kit Contents | 8 pieces (1 of each) |
| Part Number | [SKU TBC] |
| EAN | TBC |
| Compressor | CM2024D – oil-lubricated direct drive |
| Compressor Tank | 24 litre |
| Compressor Motor | 2 HP / 1.5 kW / 2850 rpm |
| Compressor Voltage | 230 V / 50 Hz / Single phase |
| Compressor Max Pressure | 8 bar / 116 psi |
| Compressor Air Displacement | 206 l/min / 7.3 cfm |
| Compressor Sound | 82 dBA |
| Compressor Dimensions | 59 × 28 × 62 cm |
| Hose | HA5215 – black polyurethane |
| Hose Length | 7.5 m |
| Hose Bore | 6.5 mm i/d (10 mm o/d) |
| Hose Fittings | Male thread R 1/4 swivel ends |
| Hose Max Pressure | 14 bar / 200 psi |
| Coupling | AC91CF – Vertex, double action |
| Coupling Thread | Female Rp 1/4 |
| Coupling Max Pressure | 14 bar / 200 psi |
| Adaptor (male) | ACA2593 – male R 1/4 |
| Adaptor (female) | ACA2746 – female Rp 1/4 |
| Spray Gun | SG01L – Lite suction |
| Spray Gun Nozzle | 1.5 mm |
| Spray Gun Bowl | 0.75 L |
| Spray Gun Operating Pressure | 3 bar / 43 psi |
| Spray Gun Air Consumption | 4.2–7.1 cfm / 120–201 l/min |
| Blowgun | BG405 – die-cast alloy, pistol grip |
| Blowgun Nozzles | Conical and safety |
| Blowgun Air Inlet | Rp 1/4 |
| Blowgun Max Supply Pressure | 10 bar / 140 psi |
| Blowgun Air Flow | 11.2 cfm / 320 l/min |
| Tyre Inflator | LAG1H03 – airlite eco, linear |
| Tyre Inflator Hose Length | 0.4 m |
| Tyre Inflator Connector | Twin hold-on |
| Tyre Inflator Range | 0–140 psi / 0–9.6 bar |
| Tyre Inflator Accuracy | ±2 psi |
| Tyre Inflator Max Inlet Pressure | 188 psi / 13 bar |
Check out our wide range of Air Compressors & full range of Air Tools & Accessories.
Toolforce
Here at Toolforce, we take great pride in the products and the ranges we offer to our customers. Order today for Fast Dispatch and Delivery. We deliver to you using our Shipping Partners DPD. Don't forget we offer Free Delivery on all orders over €100. To benefit from this you can continue to browse through thousands of high quality tools online. Hand Tools, Power Tools, Tool Storage Systems, Safety Workwear and PPE, Diagnostic Systems from the Leading Brands Milwaukee, DeWalt, Makita, Einhell, Sealey, Draper, Sip, Swp, Silverline, Autel, Vikan and Many More. When you Shop with Toolforce you are in safe hands. If you need any further assistance or have any questions on any of our products Ranges, please don't hesitate to Contact us email - info@toolforce.ie, PCL 24L 2HP Direct Drive Air Compressor Kit